Claiming - initial steps:
1. Connect your TC Bar to power:
The TC Bar M must use the supplied DC power supply; the TC Bar S can either via the supplied DC supply or by POE to a POE+ capable network switch.
2. Download and install the Control Cockpit software for your PC:
Control Cockpit (sennheiser.com)
3. Make note of the default password printed on the TC Bar's back label. It is listed below the product's individual MAC addresses and serial number.
Connect your TC Bar directly to your PC via RJ45 (Cat 5e or higher), or use a network switch or router with DHCP enabled for connecting both the TC Bar and PC
4. Open Control Cockpit on your PC.
Enter in the device password when prompted to unlock the unit's control capability. You will then be able to set a password to your liking.
For an in-depth overview of the TC Bar's options and controls in Control Cockpit, please reference the manual here:
Within Control Cockpit, you will have control over audio levels; Bluetooth, Wifi, and Dante enablement; firmware update capability; camera control settings and parameters; and priority/exclusion configurations.
5. Confirm your TC Bar is up to date - navigate to the Device tab and use the Select firmware dropdown to ensure your unit is on the latest firmware version.
If there is an update available, select the latest version, check the box accepting the license agreement, and press the Update button to begin.