Assigning host names to Sennheiser ceiling microphone solutions such as the TCC2 and TCC M on your network would be done through the GUI of your router or switch, not through the Sennheiser Control Cockpit software.
In the admin GUI of your router or switch, look for DNS options. From there, you can select host configurations.
Please note: You need to have all of the IP address of the TCC2 / TCC Ms in order to assign host names. To locate the IP address of your device, you can look in the Network section in Control Cockpit under Properties. Here, you can find the Ethernet/IPv4 settings for the device.
You can also find the IP address by using command prompt to run ipconfig /all, which will show all devices on your network and their respective IP addresses.